1) The semiconductor that changed everythingt
When a DLP® chip is coordinated with a digital video or graphic signal,
a light source, and a projection lens, its mirrors can reflect a digital
image onto a screen or other surface. The DLP® chip and the sophisticated
electronics that surround it are what we call DLP® technology.
At the heart of every DLP® projection system is an optical semiconductor
known as the DLP® chip, which was invented by Dr. Larry Hornbeck of Texas
Instruments in 1987.
The DLP® chip is probably the world's most sophisticated light switch.
It contains a rectangular array of up to 2 million hinge-mounted microscopic
mirrors; each of these micromirrors measures less than one-fifth the width
of a human hair.
When
a DLP® chip is coordinated with a digital video or graphic signal, a
light source, and a projection lens, its mirrors can reflect a digital image
onto a screen or other surface. The DLP® chip and the sophisticated
electronics that surround it are what we call DLP® technology.
2) The grayscale image
A DLP® chip's micromirrors are mounted on tiny hinges that enable them
to tilt either toward the light source in a DLP® projection system (ON)
or away from it (OFF)-creating a light or dark pixel on the projection surface.
The bit-streamed image code entering the semiconductor directs each mirror
to switch on and off up to several thousand times per second. When a mirror
is switched on more frequently than off, it reflects a light gray pixel; a
mirror that's switched off more frequently reflects a darker gray pixel.
In this way, the mirrors in a DLP® projection system can reflect pixels
in up to 1,024 shades of gray to convert the video or graphic signal entering
the DLP® chip into a highly detailed grayscale image.
3) Adding color
The white light generated by the lamp in a DLP® projection system passes
through a color wheel as it travels to the surface of the DLP® chip. The
color wheel filters the light into red, green, and blue, from which a single-chip
DLP® projection system can create at least 16.7 million colors. And the
3-chip system found in DLP Cinema® projection systems is capable of producing
no fewer than 35 trillion colors.
The
on and off states of each micromirror are coordinated with these three basic
building blocks of color. For example, a mirror responsible for projecting
a purple pixel will only reflect red and blue light to the projection surface;
our eyes then blend these rapidly alternating flashes to see the intended
hue in a projected image.
4) Application : 1-chip DLP Projection System
Televisions, home theater systems and business projectors using DLP®
technology rely on a single chip configuration like the one described above.
White light passes through a color filter, causing red, green, blue and even
additional primary colors such as yellow cyan, magenta and more to be shone
in sequence on the surface of the DLP® chip. The switching of the mirrors,
and the proportion of time they are 'on' or 'off' is coordinated according
to the color shining on them. Then the sequential colors blend to create a
full-color image you see on the screen.
